Epson Z8250NL - Manual (Page 152)

Installation Methods
152
Installation Methods
The projector can be mounted on a ceiling or placed on a desk. Also, it
can be mounted at a tilted angle, so you can flexibly project images to
various places.
Warning
• A special method of installation is required when suspending the projector from a
ceiling (ceiling mount). If installation work is not carried out correctly, the projector
could fall down. This may result in injury or accidents.
• If you use adhesives on the ceiling mount attachment points to prevent the screws
from loosening, or if you use things such as lubricants or oils on the projector, the
projector case may crack causing it to fall from its ceiling mount. This could cause
serious injury to anyone under the ceiling mount and could damage the projector.
When installing or adjusting the ceiling mount, do not use adhesives to prevent the
screws from loosening and do not use oils or lubricants.
• When mounting the projector on the ceiling, be sure to take measures to prevent it
from falling such as passing a wire through the handles.
Caution
• Do not use the projector upside down.
• Set the Direction properly in the configuration menu according to the angle of
installation. s p.67
• Using the projector at an improper angle or setting the configuration menu
incorrectly can cause malfunctions and shorten the operating life of optical parts.
q • An optional ceiling mount is required when suspending the projector from
a ceiling.
s "Optional Accessories and Consumables"
p.197
• The Projection setting can be changed from the configuration menu.
s p.67
• Suspend the projector from the
ceiling and project images from
in front of a screen.
• Suspend the projector from the
ceiling and project images from
behind a translucent screen.
• Project images from in front of a
screen.
• Project images from behind a
translucent screen.
• Project images directly up • Project images directly down
• Project images at angle