Connecting to equipment, Connecting to a computer, P.154 – Epson Z8250NL User Manual
Page 154
Connecting to Equipment
154
Connecting to Equipment
Observe the following precautions when connecting the projector to external equipment. Be sure to also read the documentation for the external
equipment.
Caution
• Turn off the projector and the external equipment. The projector or external equipment may fail if they are connected while the power is on.
• Check the shapes of the cable connector and port before connecting them. If connecting them is attempted in the wrong direction or when they do not match, failure or
equipment damage may occur.
Remove the interface cover before connecting external equipment. s "Attaching and Removing the Interface Cover"
Connecting to a Computer
This section provides examples of connecting the projector to a computer. The computer port and cable names may also be different from those given.
q
Refer to the following when projecting images from a computer that is connected through a network.
Projecting with the EasyMP Network Projection application software (provided with the projector). See your EasyMP Network Projection Operation Guide for more
information.
Projecting with the "Connect to a Network Projector" function provided with Windows Vista or Windows 7 s
Computer port
Connecting cable
Projector port
Connection 1
Monitor Out port
5BNC display cable (commercially available)
BNC input port