Epson Z8250NL - Manual (Page 38)

Projecting Two Images Simultaneously (Split Screen)
38
q • You cannot enlarge both the left screen and right screen images at the same
time.
• When one image is enlarged, the other image is reduced.
• Depending on the video signals that are input, the images on the left and
right may not appear to be the same size even if Equal is set.
Ending the split screen
Procedure
To end the split screen, press the [Esc] button on the remote con-
trol or control panel.
The following steps can also be used to end the split screen.
• Press the [Split] button on the remote control.
• Select Exit Split Screen in the Split Screen Setup and then press the
[Enter] button.
Restrictions during Split Screen Projection
Operating restrictions
The following operations cannot be performed during split screen
projection.
• Setting the configuration menu
• E-zoom
• Switching the aspect mode (The aspect mode will be set to Normal.)
s p.27
• Operations using the [User] button on the remote control
• Auto Iris
Help can be displayed only when image signals are not input or when an
error or warning notification is displayed.
Restrictions relating to images
• The default values for the Image menu are applied to the image on the
right screen. However, the settings for the image projected on the left
screen are applied to the image on the right screen for the Color Mode,
Abs. Color Temp.
, Advanced, Super-resolution, and Frame
Interpolation .
• The setting value Off for Progressive and Noise Reduction is applied
to the image on the right screen. s Signal menu p.62
• When there is no image signal input, the display screen will be the color
that is set on Display Background. The display will be Blue when the
Logo
is selected.
• When the shutter operation is performed, the display screen will be
Black .
Larger Right