Epson Z8250NL - Manual (Page 28)

Changing the Aspect Ratio of the Projected Image
28
Procedure
The aspect mode name is displayed on the screen by pressing the
[Aspect] button.
If you press the button while the aspect mode name is displayed on the
screen, it changes to the next aspect mode.
q • The aspect mode can also be set using Aspect in the Signal menu from the
configuration menu. s p.62
• When Scale on the Signal menu is set to On and Scale Mode is set to Full
Display , you cannot change the aspect mode.
Changing the Aspect Mode
(PowerLite Pro Z8450WUNL/Z8455WUNL)
Projecting images from video equipment or from the
HDMI1/2 or SDI input port
Each time the [Aspect] button on the remote control is pressed, the
aspect mode changes in the order Auto (Normal when projecting from
the SDI input port), 16:9, 16:9 (Up), 16:9 (Down), Full, Zoom, and
Native
. s p.27
Remote Control
Example: 720p signal input (resolution: 1280x720, aspect ratio: 16:9)
A Auto/Normal
B
16:9
C 16:9 (Up)
D 16:9 (Down)
E Full
F Zoom
G
Native