Rugged Cams Workhorse DVR 4 Channel - Manual (Page 126)

125
5-2. Additional Setup
Use {Additional Setup} to set the PTZ and network features.
After changing the setting on the {Additional Setup} menu, save the setting before exiting
the menu.
[Save]
Saves the setting
[Cancel]
Exits without saving the setting
[Reset]
Resets the setting
5-2-1. Selecting Additional Setup
On the real-time monitoring screen, select the [Additional Setup] button on the remote control.
The login window is then displayed as shown below:
Select the login account, enter the password using the numeric buttons on the remote control,
and click [OK].
• (The default password of the local administrator is “00000.”)
• To change the user ID, go to the ID selection box and select the
arrow (ST) buttons.
Once the correct password is inputted, the initial {Additional Setup} menu is displayed as
shown below: