Rugged Cams Workhorse DVR 4 Channel - Manual (Page 88)

87
C) Relay
Runs the alarm device connected to the DIO (sensor/relay) extension module in case of an alarm or
an event
Relay setting
On the {Recording Setup} {Data 1~4} {Generate Alarm} {Relay} menu, go to the
channel using the arrow (STW X) buttons and press the [Select] button.
On the selection box, set an event to run the alarm device using the arrow (ST) and [Select]
buttons. Multiple events may be selected.
To set all channels at the same time, go to {Relay} and press the
[Select]
button.
On the selection box, select ON or OFF using the arrow (ST) and [Select] buttons.