Rugged Cams Workhorse DVR 4 Channel User Manual
Page 81
80
To set all channels at the same time, go to
{Motion} and press the [Select]
button.
On the selection box, select [Full] using the arrow (ST) and [Select]
buttons.
Partial
Used to detect motion only in user-defined zones
On the {Recording Setup} {Data 1~4} {Event} {Motion} menu, go to the channel using
the
arrow (STW X) buttons and press the [Select]
button.
To set all channels at the same time, go to
{Motion} and select the [Main Setup] button.
On the selection box, select [Partial] using the arrow (ST) and [Select]
buttons.
The following figure then appears:
¸ р
¼
З ¼ ³Б
¤ Б ц
¿ ª¿
¡ À Мµ
¿ И
Д
´ х
º нЕ ¬
¸¯ З С
´Щ .
¸ р
¼
З ¼ ³Б
¤ Е ©
± в
¸¦ Б ¤
З
С И
Д
Е ¬
¸¯ З С
´Щ .
¸ р
¼
З ¿ µ
¿ ªА
М И ®
Б ¤
µ З
¸й ,
´ х
º нЕ ¬
¸¯ З С
´Щ .
Move the focus to the motion
detection-setting area.
Select zones.
Double-click on the selected
zones.