TA Triumph-Adler MFP 980 - Manual (Page 108)

Maintenance
6-15
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Maintenance
GB.fm
Cleaning the printer
Dust, dirt and paper debris on the outer surfaces and inside the printer can interfere with printer
performance. Clean the printer regularly.
Caution -
Use a soft cloth to clean the printer. Never use abrasive or corrosive detergents.
The fusing unit can become very hot during operation. To avoid injury - do not touch.
Wait for at least 10 minutes after the printer has been turned off and make sure that the fusing unit
has cooled before cleaning the interior of the printer.
Cleaning the outside of the printer
Clean the outside of the printer with a smooth duster.
 Clean the two transparent
scanning windows with a soft,
lint-free cloth, dampened with
alcohol. Close the scanner cover.
 Make a copy to check that the
symptoms have been cleared.