Document feed type, Economy period, P. 3-4 – TA Triumph-Adler MFP 980 User Manual

Page 41

Advertising
background image

3-4

Setting your machine

Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration

GB.fm

You may choose between more than one criteria for printing reports:

WITH

: a report is given when the transmission was properly performed or when it is completely

abandoned (but there is only one report per request),

WITHOUT

: no transmission report, however, your fax will note all transmissions that took place in

its log (refer to paragraph Logs, page 5-18),

ALWAYS

: a report is printed with each transmission,

ON ERROR

: a report is printed only if the transmission failed or is abandoned.

With each transmission report from memory, a reduced version of the first page is automatically
reproduced.

To select the report type:

231 OK - SETUP / SEND / SEND REPORT



Select the required option

WITH

,

WITHOUT

,

ALWAYS

or

ON ERROR

and confirm your choice

with

OK

.

Document feed type

You may choose the way you want to feed your documents:

• from memory, transmission will take place only after memory storage of the document and dial-

ling. It allows you to get your originals back quickly to free up the machine.

• from the feeder of the sheet-feed scanner (refer to paragraph Document depositing, page 5-1),

transmission will occur after dialling. It allows transmission of larger documents.

To select the way you want to feed your documents:

232 OK - SETUP / SEND / MEMORY SEND.



Select the option

MEMORY

or

FEEDER

and validate your choice with

OK

.

Remark

:

in feeder mode, the reduced image will not appear on the transmission report.

Economy period

This function allows you to defer a fax transmission to "off-peak hours" and thus reduce the cost of your
communications.The economy period, via the telephone network (at off-peak hours), is preset by
default from 7.00 pm to 7.30 am. Nevertheless you may change this time slot.
Modifying the economy period:

233 OK - SETUP / SEND / ECO PER.



Enter the hours of the new economy period and confirm your selection with the key

OK

.

Using the economy period:

32 OK - FAX / ECO TRANS.

Enter the call number and confirm with

OK

.

Advertising