TA Triumph-Adler MFP 980 - Manual (Page 40)

Setting your machine
3-3
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
Network
This setting enables you to individually set the type of public telephone network so that your
machine can communicate over the public network of the country you have chosen in
compliance with the applicable standards.
Remark : these settings are different from the NETWORK TYPE (p. 2-5), which allows you to choose between
public and private network.
To select the network:
202 OK - SETUP / GEOGRAPHICAL / NETWORK
 Select the required option and press the OK key to confirm.
Language
This setting enables you to choose a language other than that imposed by the
COUNTRY
setting.
To select the language:
203 OK - SETUP / GEOGRAPHICAL / LANGUAGE
 Select the required option and press the
OK
key to confirm.
Local prefix
This function is used when your fax is installed with a private network, behind a company’s
PABX. It allows you to program an additional automatic local prefix (to be defined), enabling
you to automatically exit the company’s telephone network system, but only under certain
conditions:
• the company’s internal numbers, where a prefix is not required, must be short numbers less
than the minimal size (to be defined, for example France has 10 digits),
• the outside numbers requiring a prefix, must be long numbers greater or equal to the mini-
mal size (to be defined, for example France has 10 digits).
Programming your fax with the local prefix consists of two steps:
• defining the minimal size (or equal) of the company’s outside numbers,
• defining the outgoing local prefix of the company’s telephone network. This prefix will
automatically be added as soon as an external number is dialled.
Caution -
If you define a local prefix, do not add it to the numbers stored in the directory, it
will be automatically dialled with each number.
Defining the minimal size and the local prefix
252 OK - SETUP / NETWORKS / PREFIX
 You can change the default value for the minimal size of the company’s outside numbers
and validate with
OK . The minimal size will range between 1 and 30.
 Enter the outgoing local prefix of the company’s telephone network (maximum
5 characters) and validate with
OK .
Transmission report
You may print a transmission report for all communications over the telephone network (STN).