TA Triumph-Adler MFP 980 - Manual (Page 27)

1-20
Installation
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Installation
GB.fm
T
ELEPHONE AND
LAN
CONNECTION
 Plug the end of the telephone line (F) into the terminal socket (D) and the other end into the wall
telephone socket.
 LAN connection (depending on model). Plug end of the LAN cord (as provided by your network
administrator) into the socket (C) of your terminal and the other end into your local network port
dedicated to your terminal.
P
OWER LINE CONNECTION AND SWITCH ON
Caution -
Refer to safety procedures in the chapter on Safety.
 Plug the end of the mains power cord (G) into the socket (E) of the terminal and the other end in
the wall outlet.
 Set the On/Off switch to position " I " (On).
After a few seconds, when the printer has warmed up, the date and time will appear. To adjust the
language and time of your terminal, refer to paragraph Setting your machine, page 3-1.