TA Triumph-Adler MFP 980 - Manual (Page 56)

Setting your machine
3-19
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
Programmed connection
An automatic connection to the Internet depends on how your machine is programmed and more
particularly on the standard settings (refer to paragraph Standard settings, page 3-16).
D
EACTIVATING THE
I
NTERNET FUNCTION
If you do not wish to use the Internet functions:
91 OK - INTERNET / SUPPLIER
 Select
NO ACCESS
in the ISP list and confirm with OK .
T
HE
SMS
SERVICE
Thanks to the e button you can send an SMS to subscribers all over the world. An SMS
(Short Message Service) is a service which permits short written messages to be sent to mobile
phones or other SMS-compatible devices.
The number of characters you can send per message is dependent upon the service provider and
the country you are sending your SMS from (e.g. Germany 160 characters, Italy 640 characters).
The SMS service is dependent upon the country and the service provider.
Caution: There is a special scale of charges for the SMS service.
SMS P
ARAMETERS
This menu is used to set several options:
• automatic SMS print on reception,
• beep activated during SMS reception,
• send your details activated,
• the address of your terminal.
The address is only modified if several terminals are installed on your line. It is used to
differentiate between two machines during SMS reception.
When you want a contact to send SMSs to the terminal you choose, you must send him your line
number and the destination terminal address.
If your contact does not add the address of the terminal, the SMS will be received in the terminal
with address 0.
45 OK - SMS SERVICE / PARAMETERS
 Automatic print of SMS received..
451 OK - SMS SERVICE / PARAMETERS / AUTO PRINT
 Select the option WITH or WITHOUT automatic print, then validate with OK key.