TA Triumph-Adler MFP 980 - Manual (Page 22)

Installation
1-15
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Installation
GB.fm
I
NSTALLING THE SECOND PAPER TRAY
(
DEPENDING ON MODEL OR OPTION
)
1. Remove the second paper cassette unit
and tray 2 from their packaging, inclu-
ding the protective tape used to hold
the various components in place.
2. Position the printer above the additio-
nal paper tray unit. Align the coupling
pins of the additional paper tray unit
with the corresponding notches in the
bottom of the printer.
3. Remove the paper tray cover. 4. Press the support plate located on the
paper tray until it locks into position.
5. Put a stack of 500 paper sheets, maxi-
mum, into the paper tray, making sure
to always position the paper so that the
up-side, when the paper is packed, is
always facing up.
6. Put the cover back onto the tray, and
insert the paper tray into the additional
paper unit.