TA Triumph-Adler MFP 980 - Manual (Page 91)

5-24
Operation
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Utilisation GB.fm
M
AIL BOX
(MBX FAX)
There are 32 mailboxes (MBX), enabling you to transmit documents in complete confidence using an
access code (named code MBX), to all subscribers equipped with a fax compatible to yours.
MBX 00 is public. It is handled directly by the terminal to record the messages of the fax TAD as soon
as this is put into service.
MBX’s 01 to 31 are private. Each is password-protected. They can be used to receive documents
confidentially.
The use and access to MBX 01 - 31 are conditioned by the initialisation, defined by a MBX code (if
needed) and a mnenonic (its S.I.D.).
Later you may:
• modify the features of an MBX
• print the contents of an MBX, only possible if the MBX contains one or more documents (with a
star next to the MBX). When the contents of an MBX have been printed it becomes empty
• delete an MBX, only if the MBX is initialised and empty
• print the the list of your fax machine’s MBX’s
You may receive and send through an MBX in complete confidentiality.
The deposit a document into your MBX, the access code is not needed. All documents deposited in a
MBX are added to the ones already present.
In polling, the MBX are only accessible with an MBX code.
You may perform MBX deposits or polls by:
• depositing a document in a fax MBX
• transmit to deposit a document in a remote fax MBX
• perform document poll from a remote fax.
MBX
MANAGEMENT
Creating an MBX
71 OK - MAILBOXES / CREATE MBX
 Select a free MBX out of the 31 MBX or directly enter the number of a free MBX and confirm
with
OK .
 Select option
MAILBOX CODE
and press OK .
Value 0000 is always displayed.
 Enter the code of your choice, if needed, and press
OK
.
 Select option
MAILBOX NAME
and press OK .
 Enter this MBX ’s S.I.D. (20 characters max.) and press OK .
The MBX is initialised. If you wish to initialise another, press C and repeat the same procedure.
 To exit the MBX, press .