TA Triumph-Adler MFP 980 - Manual (Page 50)

Setting your machine
3-13
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
I
NITIALISATION PARAMETERS
You must define or, at least check all parameters needed to identify yourself with the Internet.
Your ISP will provide you with these parameters as soon as you are registered with them.
The parameters are divided in three categories:
• connection, allows you to identify the dial up number, the connection identifier and the
connection password,
• message service, allows you to define the message service identifier, the message service
password and the E-Mail address,
• servers, allows you to identify the name of the OP address of Internet SMTP providers
(send) and POP3 (MBX reception) and the address of DNS 1 and DNS 2 servers. The server
address is made up of 4 groups of 3 digits maximum, separated by dots.
• SMTP Authentification, used to activate the authentification protocol when the SMTP ser-
ver used requests this to end e-mails.
Access to connection and message service parameters
91 OK - INTERNET / SUPPLIER
 Select the Internet provider from the list
NO ACCESS
,
PROVIDER_1
,
PROVIDER_2
,
PROVIDER_3
,
PROVIDER_4
,
PROVIDER_5
,
PROVIDER_6
or
LOCAL NETWORK
, and
press OK .
Choosing
NO ACCESS
disables access to Internet functions. OK .
92 OK - INTERNET / INIT. PROVIDER
921 OK - INTERNET / INIT. PROVIDER / CONNECTION
 Enter the
CALL NUMB.
, press OK .
 Enter connection
IDENTIFIER
1
, press OK .
 Enter connection
PASSWORD
, press OK .
922 OK - INTERNET / INIT. PROVIDER / MESS. SERV
 Enter Email
IDENTIFIER
, press OK .
 Enter Email
PASSWORD
, press OK .
 Enter
E-MAIL ADR
, press OK .
Access to servers parameters
923 OK - INTERNET / INIT. PROVIDER / SERVERS
 Enter
SMTP
, press
OK
.
 Enter
POP3
, press OK .
 Enter
DNS 1
(primary), press OK .
1. If the identifier has more than 16 characters, the text will automatically slide over to the left.