TA Triumph-Adler MFP 980 - Manual (Page 123)

Safety
7-1
Date en cours : 31 mars 2004
7 S
AFETY
SAFETY WARNING
Before powering on your unit, make sure the mains outlet it is connected to meets
the requirements printed on the warning label on your unit, or on the separate power
supply (depending on the model). This unit must not be installed on the floor.
If your unit works with a separate Power Supply, use only the one delivered with
your unit; never use another power supply.
If your unit works with a battery, replace it only with the same type of battery or an
equivalent type recommended by the manufacturer.
Warning: incorrect replacement of the battery may cause an explosion. Replace
only with the same or equivalent type recommended by the manufac-
turer. Dispose of used batteries according to the manufacturer’s
instructions.
Used batteries must be disposed of following the manufacturer’s instructions.
Depending on the model, the unit’s mains plug may be the only way to disconnect
the unit from the power network. Therefore you must respect the following:
• Your unit must be connected to a mains outlet located nearby.
• The mains outlet must remain easily accessible.
Your unit is delivered with a power cord including a plug which, depending on the
model, may be:
• without earth (the symbol on the warning label).
• with earth (no symbol on the warning label). It is imperative that a power plug
with an earth be connected to a wall outlet with an earth.
The European version of this unit includes the stamp, following the 73/23/CEE, 89/
336/CEE and 93/68/CEE directives.
!
If the machine is powered when you remove the upper cover,
be careful with the two following dangers:
• Laser beam interception by human eye can produce irre-
mediable injuries.
• Human contact with parts electrically powered can pro-
duce a very dangerous electric shock.
!
APPAREIL A RAYONNEMENT LASER
DE CLASSE 1
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPARECCHIO LASER DI CLASSE 1
PRODUCTO LASER DE CLASE 1
APARELHO A LASER DE CLASSE 1