TA Triumph-Adler MFP 980 - Manual (Page 23)

1-16
Installation
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Installation
GB.fm
Remark : always get hold of the paper tray with both hands when removing it or putting it back into the additional paper
unit.
I
NSTALLING THE
D
UPLEX
-
UNIT
(
DEPENDING ON MODEL OR OPTION
)
After installation and connection, the duplex-unit will enable you to print, receive faxes or to receive
local photocopies in mode.
 Switch off your terminal and pull out the mains plug.
 Take the duplex unit out of its box and remove the protective film.
 Remove the connector cover (C) to obtain access to the connector.
 Clip the connector of the flat cable (E) of the duplex unit in the connector (D) located at the
bottom left hand side of the terminal.
B
C
A