TA Triumph-Adler MFP 980 - Manual (Page 39)

3-2
Setting your machine
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Configuration
GB.fm
B
EFORE TRANSMISSION
Date/Time
At any moment you may change the date and time on your fax machine.
To change the date and time:
21 OK - SETUP / DATE/TIME
 Enter the numbers of the required time and date one after another,
(for example November 8 2004 at 9h33, press
0 8 1 1 0 4 0 9 3 3 ) and press OK to confirm.
Your fax number/your name
Your fax will print out your fax number on each document it transmits if you save this number and if
the machine is set to
SENDING HEADER
(refer to paragraph Technical parameters, page 3-8).
To save your fax number and your name:
22 OK - SETUP / NUMBER / NAME
 Enter your fax number (20 digits max.) and press OK to confirm.
 Enter your name (20 characters max) then press OK to confirm.
Type of network
You may connect your fax to either a PSTN or private network such as private automatic branch
exchange (PABX). You must select the network which is the most convenient.
To select the type of network:
251 OK - SETUP / NETWORKS / TEL. NETWORK
 Select option
PABX
or
PSTN
then confirm your choice with OK .
Geographical settings
These settings will enable you to use your machine in different preset countries using different
languages.
Country
By choosing a country, you initialise:
• the settings for the public telephone network,
• the language by default.
To select the country:
201 OK - SETUP / GEOGRAPHICAL / COUNTRY
 Select the required option and press the OK key to confirm.