TA Triumph-Adler MFP 980 - Manual (Page 119)

6-26
Maintenance
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Maintenance
GB.fm
M
ISCELLANEOUS INCIDENTS
At switch-on nothing appears on screen
Check that the mains cable is plugged in, and check the mains plug if necessary.
The fax does not detect the presence of your inserted document. The message
READY
does not
appear on the screen.
At the start and during scanning,
REMOVE DOCUMENT
appears on the screen.
Remove the document or press key .
Check the thickness of the document (50 sheets of paper of 80 g/m
2
).
Iron out the sheets if needed.
Help the sheets along.
The fax machine does not receive any faxes
Check that the telephone line cable is correctly plugged in and that there is a tone signal on the
telephone line by means of the
key.
You receive a blank page
Make a photocopy of a document ; if it is correct then your fax is functioning normally. Call back the
subscriber and have him resend the document. It was probably sent with the sheet inserted backwards.
You cannot send a fax
Check that the telephone line cable is correctly plugged in.
Check the tone by pressing the
key.
Check the prefix is correctly programmed and used.