TA Triumph-Adler MFP 980 - Manual (Page 69)

5-2
Operation
Date en cours : 31 mars 2004
\\Sct01002\BE31-DOC\DOC 31 - En cours\Travaux en cours\Fax\MFF\MFF 251 444 159A_LU MFF SMS Sagem GB version 2\Utilisation GB.fm
From the flat scanner
Using the handle, lift up the document feeder tray.
Put your document, with the printed face down on the scanner window. The scanner origin is located
at your end, to the left, as shown opposite.
Once the operation is complete, lift the document feeder tray and recover your document.
C
HOOSING THE RESOLUTION
/
CONTRAST
Resolution
You have 4 modes for document transmission.
The mode choice depends on the type of document to be transmitted:
• Normal mode, to be used for good quality documents, without drawings or small details
• Fine mode, symbolised by Fine at the bottom of the display screen. To be used for documents
with drawings or small characters
• Super Fine mode, symbolised by SFine at the bottom of the display screen. To be used for docu-
ments with very fine or small character drawings
• Photo mode symbolised by Photo at the bottom of the display screen. To be used for photogra-
phic documents
To select the resolution mode:
 Press key as many times as necessary to select the required mode. A icon on the screen
shows the current mode.
 Using the handle, lift up the document
feeder tray.
 Put your document, with the printed face
down on the scanner window. The
scanner origin is located at your end, to
the left, as shown opposite.
 Once the operation is complete, lift the
document feeder tray and recover your
document.
Scanner origin