TA Triumph-Adler 261ci - Manual (Page 349)

10-13
Troubleshooting > Responding to Error Messages
Responding to Error Messages
If the touch panel displays any of these messages, follow the corresponding procedure.
A
B
Error Message Checkpoints Corrective Actions Reference
Page
Activation error. — Failed to activate the application.
Contact administrator. —
— Expansion Authentication is disabled.
Turn the main power switch off and on. If
the error exists, contact administrator. —
Add the following paper in
cassette #. Does the selected paper size
matchs the paper size loaded in
the specified paper source? Press [Continue] to continue printing.
Press [Cancel] to cancel the job. —
Is the indicated cassette out of
paper? Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source. 3-3
Add the following paper in the
multi purpose tray. Does the selected paper size
matches the paper size loaded in
the specified paper source? Press [Continue] to continue printing.
Press [Cancel] to cancel the job. —
Is the paper of the selected size
loaded in the multi purpose tray? Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source. 3-6
Error Message Checkpoints Corrective Actions Reference
Page
Box limit exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— Document box is full, and no further
storage is available; Job is canceled.
Press [End]. Try to perform the job again
after printing or deleting data from the
Document box. —