TA Triumph-Adler 261ci - Manual (Page 355)

10-19
Troubleshooting > Responding to Error Messages
W
Responding to Send Error
Error Message Checkpoints Corrective Actions Reference
Page
Warning low memory. — Job cannot be started. Try again later. —
Code Error Corrective Actions Reference
Page
1101 Failed to send the e-mail. Check the host name of the SMTP server on the Embedded Web
Server RX. 2-34
Failed to send via FTP. Check the host name of FTP. 6-20
Failed to send via SMB. Check the host name of SMB. 6-20
1102 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
• Host name
• Path
6-20
Failed to send the e-mail. Check the followings on the Embedded Web Server RX.
• SMTP login user name and login password
• POP3 login user name and login password 2-34
Failed to send via FTP. Check the FTP settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
• Path
• Folder share permissions of the recipient
6-20
1103 Failed to send via SMB. Check the SMB settings.
• Login user name and login password
NOTE: If the sender is a domain user, specify the domain
name.
• Path
• Folder share permissions of the recipient
6-20
Failed to send via FTP. Check the FTP settings.
• Path
• Folder share permissions of the recipient 6-20
1104 Failed to send the e-mail. Check the e-mail address.
NOTE: If the address is rejected by the domain, you cannot
send the e-mail.
6-17
1105 Failed to send via SMB. Select [On] of the SMB settings on the Embedded Web Server RX. 2-32
Failed to send the e-mail. Select [On] of the SMTP settings on the Embedded Web Server RX.
Failed to send via FTP. Select [On] of the FTP settings on the Embedded Web Server RX.
1106 Failed to send the e-mail. Check the sender address of SMTP on the Embedded Web
Server RX. 2-34
1131 Failed to send via FTP. Select [On] of the secure protocol settings on the Embedded Web
Server RX. 2-32