TA Triumph-Adler 261ci - Manual (Page 82)

3-6
Common Operations > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 50 sheets of Legal or smaller plain paper (80 g/m²).
The multi purpose tray accepts paper sizes from A4 to A6 and Hagaki and from Legal to Statement, and 16K. Be sure to
use the multi purpose tray when you print on any special paper.
The capacity of the multi purpose tray is as follows.
• A4 or smaller plain paper (80 g/m²), recycled paper or color paper: 50 sheets
• Hagaki: 15 sheet
• OHP film: 1 sheet
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9), Envelope #6
(Commercial #6 3/4), Monarch, Youkei 4, Youkei 2: 5 sheets
• Heavy paper (128 to 220 g/m²): 30 sheets
1
Adjust the multi purpose tray size.
1
2
When using legal size paper, pull out the sub tray.
IMPORTANT
When using media types other than plain paper (such as recycled or colored paper), always specify the media
type setting. (Refer to Quick Setup Wizard on page 3-29.) If you are using a paper weight of 106 g/m² or more,
set the media type to Thick.
NOTE
When you load custom size paper, enter the paper size by referring to Paper Size on page 9-8.
When you use special paper such as thick paper, select the media type by referring to Media Type on page 9-8.