St u – TA Triumph-Adler 261ci User Manual
Page 354
10-18
Troubleshooting > Responding to Error Messages
S
T
U
Error Message
Checkpoints
Corrective Actions
Reference
Page
Scanner memory is full.*
*
When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
—
Scanning cannot be performed due to
insufficient memory of scanner. Only
one copy of the scanned pages is
available. Press [Continue] to print,
send or store the scanned pages. Press
[Cancel] to cancel the printing job.
—
Send error.*
—
An error has occurred during
transmission.Refer to Responding to
Send Error for the error code and
corrective actions.
System error.
—
System error has occurred. Follow the
instructions on the touch panel.
—
Error Message
Checkpoints
Corrective Actions
Reference
Page
The cover is open.
Is there any cover which is
open?
Close the cover indicated on the touch
panel.
—
The phone receiver is off the
hook.
—
Put down the receiver.
—
The power cable is unplugged.
—
Disconnect the power cord from the
machine and connect it to the paper
feeder (multi purpose).
—
This memory is not formatted.
Is the removable memory
formatted by this machine?
Perform [Format] on this machine.
Toner is empty. [C][M][Y][K]
—
Replace the toner container.
Toner is running out. [C][M][Y][K]
—
It is almost time to replace the toner
container. Obtain a new toner container.
—
Error Message
Checkpoints
Corrective Actions
Reference
Page
Unknown Toner Installed.
Is the installed toner container
our own brand?
We will not be liable for any damage
caused by the use of third party supplies
in this machine.
—
Unknown Toner Installed. PC
[C][M][Y][K]
Does the installed toner
container’s regional specification
match the machine’s?
Install the specified container.
—