Amprobe PQ55A Power-Analyzer - Manual (Page 33)

If a measured value recording is enabled in the measuring instrument, a data
transmission is not possible.
The reading and generation of the list can take some minutes in case of a large
number of measured values or in case of full memory.
If one measurement includes more than 10000 measured values, they will be
divided into two lists or files. The following note will be displayed:
Click OK to confirm. The two lists
will be generated.
Click the button to save these listed measured values.
For the further analysis of the saved data please refer to the description given in
page 29.
Deleting data logger memory
Click the (ERASE) button to delete all measurements saved in the Power Analyzer.
There will be an additional safety query prior to the deletion process.
Click [OK] to confirm the deletion
process or click [Cancel] to cancel it.
33