Power supply, Operation elements and connections, Front view – operation elements – Amprobe PQ55A Power-Analyzer User Manual
Page 7
Power Supply
The power to the unit is realized by means of a mains adapter or by six 1.5 volt
batteries.
�
The mains adapter may only be connected to input voltage as indicated on
the name plate.
�
Never use the batteries and the mains adapter simultaneously as the batteries
will warm up and can explode.
�
Only the mains adapter shipped with the PQ55A may be connected and used.
Operation Elements and Connections
Side view – connecting fields
1.
Connections for voltage measurement (U1, U2, U3, N)
• The 3 input ports are not galvanically isolated, they have the common refer-
ence point “N” (neutral).
• Only safety test leads with CAT III 600V ratings are to be used.
2.
Connections for clamp adapter (I1, I2, I3, I4=N, neutral)
• The correct assignment of connections regarding voltage and current must
imperatively be observed.
Front view – operation elements
Figure: Front view – operation elements
7