Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 112
Advertising
Configuring Your Controller
100
3ware SAS/SATA RAID Software User Guide, Version 9.5.1
To change the phy link speed in 3BM
1
On the main 3BM screen,
Tab
to
Settings
and press
Enter
.
2
On the pop-up menu, select
Phy Policies
and press
Enter
.
3
On the Controller Phy Policies page, use the arrow keys to select the Phy
for which you want to set the link speed.
4
Press
Enter
to display a popup of the possible settings, select the one you
want, and press
Enter
again.
Figure 44. Controller Phy Policies page
Advertising