Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 223)

Locating a Specific Enclosure Component
www.3ware.com 211
Locating a Specific Enclosure Component
If you have a supported enclosure and the identify feature is supported by
your enclosure manufacturer, you can locate power supplies, fans, and
temperature sensors by blinking the leds associated with them. This can help
you quickly identify which component needs to be checked or replaced. The
specific components that can be located in this way will depend on your
enclosure.
For details about how to locate a drive by blinking an LED, see “Locating a
Drive by Blinking Its LED” on page 152.
To locate a fan, power supply, or temperature sensor
1 Choose Monitor > Enclosure Support from the 3DM menu.
2 On the Enclosure Summary page, click the blue Enclosure ID link for the
enclosure you are interested in.
3 Check the Identify box next to the component you want to locate.
4 Examine the enclosure for the blinking LED.
Downloading an Enclosure Diagnostic Log
The enclosure diagnostic log may be requested by 3ware Customer Support to
help troubleshoot problems on your controller. You can download this
diagnostic log from the Enclosure Details page.
To download the diagnostic log
1 In 3DM, choose Monitor > Enclosure Summary from the menu bar.
2 Make sure the correct controller is displayed in the Select Controller
field in the menu bar.
3 On the Enclosure Summary page, click the ID link of the desired
enclosure.
The Enclosure Details page for the selected controller appears.
4 Click on the Diagnostic Text link.
5 When the Save or Open dialog box appears, navigate to where you want
to save the log and click
OK .