Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 353)

www.3ware.com 341
Drive timeout detected (0009) 268
Flash file system error detected (003F) 288
Flash file system repaired (0040) 288
Incomplete unit detected (0006) 266
Initialize completed (0007) 267
Initialize failed (000E) 270
Initialize paused (003C) 286
Initialize started (000C) 269
Migration completed (0035) 283
Migration failed (0034) 282
Migration paused (003E) 287
Migration started (0033) 282
Primary DCB read error occurred (0042) 289
Rebuild completed (0005) 266
Rebuild failed (0004) 265
Rebuild paused (003B) 286
Rebuild started (000B) 269
Replacement drive capacity too small (002E) 280
Sector repair completed (0023) 274
SO-DIMM not compatible (0037) 284
SO-DIMM not detected (0038) 284
Source drive ECC error overwritten(002C) 279
Source drive error occurred(002D) 280
Spare capacity too small for some units (0032) 282
Unclean shutdown detected (0008) 267
Unit inoperable (001E) 272
Unit number assignments lost (0041) 289
Unit Operational (001F) 272
Upgrade UDMA mode (0022) 274
Verify completed(002B) 279
Verify failed (002A) 278
Verify fixed data/parity mismatch (0036) 284
Verify not started, unit never initialized (002F) 281
Verify paused (003D) 287
Verify started (0029) 277
AEN messages 154, 240, 258
alarms 154
alert utility (WinAVAlarm) 155
viewing 154
Alarms page, 3DM 240
alert utility (WinAVAlarm) 155
arrays 5
array roaming 6, 136, 138
definition 314
definition 314
moving from one controller to another 138
removing in 3DM 136
asterisk next to unit 216, 218
Auto Rebuild policy 17, 88
setting 91, 227
Auto Verify policy for units 225
setting (3DM) 120
auto-carving 92
auto-carving policy 88
auto-carving policy
setting 227
available drives, 3DM 237
B
background initialization after power failure
162
background tasks
background rebuild rate (definition) 315
background task rate 225
background task rate, setting 172
definition 17
initialization 158
overview 158
prioritizing 173
rebuilding a unit 167
scheduling 173
verification 162
Backup DCB read error detected (0043) 289
Battery capacity is below error level (0059) 298
Battery capacity is below warning level (0058) 297
Battery capacity test completed (0050) 295
Battery capacity test is overdue (0053) 296
Battery capacity test started (004E) 294
Battery charging completed (0056) 297
Battery charging fault (0057) 297
Battery charging started (0055) 296
Battery health check completed (0052) 296
Battery health check failed (005D) 299
Battery health check started (0051) 295
Battery is not present (005B) 298
Battery is present (005A) 298
Battery is weak (005C) 299
Battery temperature is high (004B) 293
Battery temperature is low (004A) 292
Battery temperature is normal (0049) 292
Battery temperature is too high (004D) 294
Battery temperature is too low (004C) 293
Battery voltage is high (0046) 290
Battery voltage is low (0045) 290
Battery voltage is normal (0044) 290
Battery voltage is too high (0048) 291
Battery voltage is too low (0047) 291
BBU
Battery Backup Information page 241
testing battery capacity 203
viewing battery information 202
BIOS
showing version 214
BIOS Manager, using 60
blinking LEDs
to locate drives 152
to locate enclosure components 211
blinking LEDs (drive locate) 216, 220, 246
Boot volume size
definition 315
boot volume size, specifying 103