Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 93)

Setting Up 3DM Preferences
www.3ware.com 81
Setting Up 3DM Preferences
The 3DM 2 Settings page lets you define preference settings that affect the
overall operation of 3DM. Most of these settings are specified initially during
installation of 3DM.
On the 3DM 2 Settings page you can perform the following tasks:
•
Setting and Changing 3DM Passwords
• Managing E-mail Event Notification
• Enabling and Disabling Remote Access
• Setting the Listening Port #
• Setting the Frequency of Page Refreshes
Setting and Changing 3DM Passwords
3DM provides different access levels for users and administrators.
The Administrator access level allows the user to fully configure 3DM. The
User access level allows the user to view pages within 3DM. These passwords
work independently of each other.
The default password for both the User and Administrator is “3ware”.
Passwords are case sensitive.
You can only change passwords if you are logged in as Administrator. If you
change the Administrator password, you will be automatically logged out, and
must log back in with the new password.
Enclosure Details
page Shows details about a particular enclosure, including status
information. You can also use this page to blink the LED for a
particular drive.
To view this page, click the ID number of the Enclosure on the
Enclosure Summary page.
3DM 2 Settings
page Lets you set preferences, including email notification for
alarms, passwords, page refresh frequency, whether remote
access is permitted, and the incoming port which 3DM will use
for listening.
To view this page, click 3DM 2 Settings on the menu bar.
Table 8: List of 3DM Pages
3DM Page Description