Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 32)

Getting Started with Your 3ware RAID Controller
20 3ware SAS/SATA RAID Software User Guide, Version 9.5.1
Initial Settings for Policies and Background Tasks
The table below lists the default settings for policies and background tasks.
These settings are used if you do not explicitly change the policy settings.
Table 6: Default Settings for Policies and Background Tasks
Policy Default Value Where to Change
Controller-Level Settings
(For details, see “Configuring Your Controller” on page 86
Auto-Rebuild Enabled 3BM, 3DM, CLI
Auto-Carving Enabled 3BM, 3DM, CLI
Auto-Detect Enabled CLI
Auto-Verify Preferred Start
Day and Time (Basic) Friday, 12 am 3BM, 3DM, CLI
Auto-Verify Verify Schedule
(Advanced) Seven days of the week,
starting at 12 am and
running 24 hours. 3DM, CLI
Carve Size or Factor 2048 GB 3BM, 3DM, CLI
Drives Per Spinup 1 3BM, CLI
Delay Between Spinup 6 seconds 3BM, CLI
Export Unconfigured (JBOD)
Disks No 3BM, CLI
Staggered Method ATA-6 3BM
Staggered Spinup Enabled 3BM
Unit-Level Settings
(For details, see “Setting Unit Policies” on page 116)
Auto Verify Enabled 3BM. 3DM, CLI
ECC Overwrite (Continue on
Error When Rebuilding) Disabled 3BM, 3DM, CLI
Boot Volume Size Unspecified 3BM, CLI
Initialization Method Foreground 3BM
Queuing (NCQ) Enabled 3BM, 3DM, CLI
Rapid RAID Recovery All (Fast Rebuild/Shutdown) 3BM, 3DM, CLI
StorSave Profile Protection 3BM, 3DM, CLI
Write Cache Enabled 3BM, 3DM, CLI