0028 dcb version unsupported, 0029 verify started – Avago Technologies 3ware 9650SE-12ML (Channel) User Manual
Page 289
Error and Notification Messages
www.3ware.com
277
Action
If this error occurs, please contact 3ware technical support at
http://
www.3ware.com/support/index.asp
for assistance.
0028 DCB version unsupported
Event Type
Error
Cause
The unit that is connected to your 3ware RAID controller was created on a
legacy 3ware product that is incompatible with your new controller.
During the evolution of the 3ware product line, the format of the Drive
Configuration Block (DCB) has been changed to accommodate new features.
The DCB format expected by the 3ware RAID controller and the DCB that is
written on the drive must be compatible. If they are not, this message is sent.
Action
Return the drives back to their original controller and contact 3ware technical
support at
http://www.3ware.com/support/index.asp
for further assistance.
0029 Verify started
Event Type
Information
Cause
The 3ware RAID controller has started verifying the data integrity of a unit.
The verification functions for different RAID levels are as follows:
•
Single and Spare.
Verify = Media scan
•
RAID 0.
Verify = Media scan
•
RAID 1 and 10.
Verify = Comparison of mirror sides
•
RAID 5, 6, and 50.
Verify = Comparison of parity data with user data
Action
Allow verify to complete to identify any possible data integrity issues.