PLANET GS-5220-16S8C - Manual (Page 209)

User’s Manual of GS-5220 Series
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
 IP Protocol Value
Specify the Time-to-Live settings for this ACE.
■ zero : IPv4 frames with a Time-to-Live field greater than zero must not be
able to match this entry.
■ non-zero : IPv4 frames with a Time-to-Live field greater than zero must be
able to match this entry.
■ Any : Any value is allowed ("don't-care").
 IP TTL
Specify the fragment offset settings for this ACE. This involves the settings for the
More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an
IPv4 frame.
■ No : IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must not be able to match this entry.
■ Yes : IPv4 frames where the MF bit is set or the FRAG OFFSET field is
greater than zero must be able to match this entry.
■ Any : Any value is allowed ("don't-care").
 IP Fragment
Specify the options flag setting for this ACE.
■ No : IPv4 frames where the options flag is set must not be able to match
this entry.
■ Yes : IPv4 frames where the options flag is set must be able to match this
entry.
■ Any : Any value is allowed ("don't-care").
 IP Option
Specify the source IP filter for this ACE.
■ Any : No source IP filter is specified. (Source IP filter is "don't-care".)
■ Host : Source IP filter is set to Host. Specify the source IP address in the
SIP Address field that appears.
■ Network : Source IP filter is set to Network. Specify the source IP address
and source IP mask in the SIP Address and SIP Mask fields that appear.
 SIP Filter
When "Host" or "Network" is selected for the source IP filter, you can enter a
specific SIP address in dotted decimal notation.
 SIP Address
When "Network" is selected for the source IP filter, you can enter a specific SIP
mask in dotted decimal notation.
 SIP Mask
 DIP Filter Specify the destination IP filter for this ACE.
■ Any : No destination IP filter is specified. (Destination IP filter is
"don't-care".)
■ Host : Destination IP filter is set to Host. Specify the destination IP address
in the DIP Address field that appears.
■ Network : Destination IP filter is set to Network. Specify the destination IP
address and destination IP mask in the DIP Address and DIP Mask fields
209