PLANET GS-5220-16S8C - Manual (Page 214)

User’s Manual of GS-5220 Series
4.10.4 ACL Ports Configuration
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in Figure 4-10-4 appears.
Figure 4-10-4: ACL Ports Configuration Page Screenshot
The Page includes the following fields:
Object Description
The logical port for the settings contained in the same row. 
Port
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.

Policy ID
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".

Action
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".

Rate Limiter ID
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
 Port Redirect
Specify the logging operation of this port. The allowed values are:
■ Enabled : Frames received on the port are stored in the System Log.
■ Disabled : Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate are limited.
 Logging
 Shutdown Specify the port shut down operation of this port. The allowed values are:
■ Enabled : If a frame is received on the port, the port will be disabled.
214