PLANET GS-5220-16S8C - Manual (Page 242)

User’s Manual of GS-5220 Series
The secret key - up to 63 characters long - shared between the RADIUS server
and the switch.
 Key
The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets.
If this field is left blank, the IP address of the outgoing interface is used.
 NAS-IP-Address
The IPv6 address to be used as attribute 95 in RADIUS Access-Request
packets. If this field is left blank, the IP address of the outgoing interface is used.
 NAS-IPv6-Address
The identifier - up to 253 characters long - to be used as attribute 32 in RADIUS
Access-Request packets. If this field is left blank, the NAS-Identifier is not
included in the packet.
 NAS-Identifier
Server Configuration
The table has one row for each RADIUS Server and a number of columns, which are:
Object Description
To delete a RADIUS server entry, check this box. The entry will be deleted during
the next Save.
 Delete
The IP address or hostname of the RADIUS server.  Hostname
The UDP port to use on the RADIUS server for authentication.  Auth Port
The UDP port to use on the RADIUS server for accounting.  Acct Port
This optional setting overrides the global timeout value. Leaving it blank will use
the global timeout value.
 Timeout
This optional setting overrides the global retransmit value. Leaving it blank will
use the global retransmit value.
 Retransmit
This optional setting overrides the global key. Leaving it blank will use the global
key.
 Key
Buttons
: Click to ad d a new RADIUS server. An empty row is added to the table, and the RADIUS
server can be configured as needed. Up to 5 servers are supported.
: Click to undo the addition of the new server.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
242