PLANET GS-5220-16S8C - Manual (Page 76)

User’s Manual of GS-5220 Series
information is sent. The community name is used to identify the group. A SNMP device or agent may belong to more than one
SNMP community. It will not respond to requests from management stations that do not belong to one of its communities. SNMP
default communities are:
。 Write = private
。 Read = public
Use the SNMP Menu to display or configure the Managed Switch's SNMP function. This section has the following items:
 System Configuration Configure SNMP on this Page.
 Trap Configuration Configure SNMP trap on this Page.
 System Information The system information is provided here.
 SNMPv3 Communities Configure SNMPv3 communities table on this Page.
 SNMPv3 Users Configure SNMPv3 users table on this Page.
 SNMPv3 Groups Configure SNMPv3 groups table on this Page.
 SNMPv3 Views Configure SNMPv3 views table on this Page.
 SNMPv3 Access Configure SNMPv3 accesses table on this Page.
4.3.2 SNMP System Configuration
Configure SNMP on this Page. The SNMP System Configuration screen in Figure 4-3-1 appears.
Figure 4-3-1: SNMP System Configuration Page Screenshot
The Page includes the following fields:
Object Description

Mode Indicates the SNMP mode operation. Possible modes are:

Enabled : Enable SNMP mode operation.

Disabled : Disable SNMP mode operation.

Version
Indicates the SNMP supported version. Possible versions are:

SNMP v1 : Set SNMP supported version 1.

SNMP v2c : Set SNMP supported version 2c.

SNMP v3 : Set SNMP supported version 3.
76