PLANET GS-5220-16S8C - Manual (Page 297)

User’s Manual of GS-5220 Series
4.14.5 Neighbor
This Page provides a status overview for all LLDP neighbors. The displayed table contains a row for each port on which an
LLDP neighbor is detected. The LLDP Neighbor Information screen in Figure 4-14-4 appears.
Figure 4-14-4: LLDP Neighbor Information Page Screenshot
The Page includes the following fields:
Object Description
 Local Port The port on which the LLDP frame was received.
 Chassis ID The Chassis ID is the identification of the neighbor's LLDP frames.
 Port ID The Port ID is the identification of the neighbor port.
 Port Description Port Description is the port description advertised by the neighbor unit.
 System Name System Name is the name advertised by the neighbor unit.
 System Capabilities System Capabilities describes the neighbor unit's capabilities. The possible
capabilities are:
1. Other
2. Repeater
3. Bridge
4. WLAN Access Point
5. Router
6. Telephone
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
 Management Address Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for
instance hold the neighbor's IP address.
297