PLANET MGSW-28240F - Manual (Page 239)

User’s Manual of MGSW-28240F
239

IPv4/Other : The ACE will match IPv4 frames, which are not
ICMP/UDP/TCP.

IPv6 : The ACE will match all IPv6 standard frames.
 Action Indicates the forwarding action of the ACE.

Permit : Frames matching the ACE may be forwarded and learned.

Deny : Frames matching the ACE are dropped.
Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When
Disabled is displayed, the rate limiter operation is disabled.
 Rate Limiter
 Port Redirect Indicates the ingress port of the ACE. Possible values are:

All: The ACE will match all ingress port.

Port: The ACE will match a specific ingress port.
 Mirror Specify the mirror operation of this port. Frames matching the ACE are mirrored
to the destination mirror port. The allowed values are:

Enabled: Frames received on the port are mirrored.

Disabled: Frames received on the port are not mirrored.
The default value is "Disabled".
The counter indicates the number of times the ACE was hit by a frame.  Counter
 Modification Buttons You can modify each ACE (Access Control Entry) in the table using the following
buttons:
: Inserts a new ACE before the current row.
: Edits the ACE row.
: Moves the ACE up the list.
: Moves the ACE down the list.
: Deletes the ACE.
: The lowest plus sign adds a new entry at the bottom of the ACE listings.
Buttons
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.
: Click to clear the counters.
: Click to remove all ACEs.