PLANET MGSW-28240F - Manual (Page 352)

User’s Manual of MGSW-28240F
The page includes the following fields:
General Settings:
Object Description
Controls whether loop protections is enabled (as a whole). 
Enable Loop
Protection
The interval between each loop protection PDU sent on each port. valid values
are 1 to 10 seconds.

Transmission Time
 Shutdown Time The period (in seconds) for which a port will be kept disabled in the event of a
loop is detected (and the port action shuts down the port). Valid values are 0 to
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration:
Object Description
The switch port number of the port. 
Port
Controls whether loop protection is enabled on this switch port. 
Enable
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
 Action
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
 Tx Mode
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Status
This page displays the loop protection port status the ports from the Managed Switch.
Figure 4-16-2: Loop Protection Status Page Screenshot
352