PLANET MGSW-28240F - Manual (Page 246)

User’s Manual of MGSW-28240F
 DIP Filter Specify the destination IP filter for this ACE.

Any : No destination IP filter is specified. (Destination IP filter is
"don't-care".)

Host : Destination IP filter is set to Host. Specify the destination IP
address in the DIP Address field that appears.

Network : Destination IP filter is set to Network. Specify the destination
IP address and destination IP mask in the DIP Address and DIP Mask
fields that appear.
When "Host" or "Network" is selected for the destination IP filter, you can enter a
specific DIP address in dotted decimal notation.
 DIP Address
When "Network" is selected for the destination IP filter, you can enter a specific
DIP mask in dotted decimal notation.
 DIP Mask
 ICMP Parameters
Object Description

ICMP Type Filter Specify the ICMP filter for this ACE.

Any : No ICMP filter is specified (ICMP filter status is "don't-care").

Specific : If you want to filter a specific ICMP filter with this ACE, you
can enter a specific ICMP value. A field for entering an ICMP value
appears.

ICMP Type Value When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value. The allowed range is 0 to 255. A frame that hits this ACE matches this
ICMP value.

ICMP Code Filter Specify the ICMP code filter for this ACE.

Any : No ICMP code filter is specified (ICMP code filter status is
"don't-care").

Specific : If you want to filter a specific ICMP code filter with this ACE,
you can enter a specific ICMP code value. A field for entering an ICMP
code value appears.
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value. The allowed range is 0 to 255. A frame that hits this ACE
matches this ICMP code value.

ICMP Code Value
 TCP/UDP Parameters
Object Description

TCP/UDP Source Filter Specify the TCP/UDP source filter for this ACE.

Any : No TCP/UDP source filter is specified (TCP/UDP source filter
status is "don't-care").
246