7 vlan setting example, 1 two separate 802.1q vlans – PLANET WGSD-10020HP User Manual
Page 114
User’s Manual of WGSD-10020 Series
4.6.7 VLAN setting example:
Separate VLAN
802.1Q VLAN Trunk
Port Isolate
4.6.7.1 Two Separate 802.1Q VLANs
The diagram shows how the Managed Switch handles Tagged and Untagged traffic flow for two VLANs. VLAN Group 2 and
VLAN Group 3 are separated VLANs. Each VLAN isolates network traffic, so only members of the VLAN receive traffic from the
same VLAN members. The screen in
Figure 4-6-7
appears and
Table 4-6-8
describes the port configuration of the Managed
Switches.
Figure 4-6-7:
Two Separate VLANs Diagram
VLAN Group
VID
Untagged Members
Tagged Members
VLAN Group 1
1
Port-7 ~ Port-28
N/A
VLAN Group 2
2
Port-1,Port-2
Port-3
VLAN Group 3
3
Port-4,Port-5
Port-6
Table 4-1:
VLAN and Port Configuration
The scenario is described as follows:
Untagged packet entering VLAN 2
114