5 auto-negotiation – PLANET WGSD-10020HP User Manual
Page 334
Advertising
User’s Manual of WGSD-10020 Series
334
the re-transmission rate. No packet loss will occur.
5.5 Auto-Negotiation
The STP ports on the Switch have built-in "Auto-negotiation". This technology automatically sets the best possible bandwidth
when a connection is established with another network device (usually at Power On or Reset). This is done by detecting the
modes and speeds of both devices which are connected. Both the 10Base-T and 100Base-TX devices can connect with the port
in either half- or full-duplex mode. 1000Base-T can be only connected in full-duplex mode.
Advertising