PLANET WGSD-10020HP - Manual (Page 315)

User’s Manual of WGSD-10020 Series
Figure 4-16-6: PoE Schedule Screenshot
Please press Add New Rule button to start set PoE Schedule function. You have to set PoE schedule to profile then go back to
PoE Port Configuration, and select “Schedule” mode from per port “PoE Mode” option then you can indicate which schedule
profile could be applied to the PoE port.
The page includes the following fields:
Object Description
 Profile Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
 Week Day Allows user to set week day for defining PoE function by enabling it on the day.
 Start Hour Allows user to set what hour for PoE function by enabling it.
 Start Min Allows user to set what minute for PoE function by enabling it.
 End Hour Allows user to set what hour for PoE function by disabling it.
 End Min Allows user to set what minute for PoE function by disabling it.
 Reboot Enable Allows user to enable or disable the whole PoE port reboot by PoE reboot schedule.
Please note that if you want PoE schedule and PoE reboot schedule to work at the
same time, please use this function, NOT Reboot Only function. This function offers
administrator to reboot PoE device at an indicated time if necessary.
315