8 web configuration, 1 introduction of configuration, 1 ways to configure – PLANET VIP-2020PT User Manual
Page 44: 2 password configuration, 2 setting via web browser, Web configuration, Ntroduction of configuration, Ways to configure, Password configuration, Etting via web browser
Enterprise HD PoE IP Phone
VIP-2020PT
8 Web Configuration
8.1 Introduction of configuration
8.1.1
Ways to configure
The VIP-2020PT has three different ways for different users.
z Use phone keypad.
z Use web browser (recommended way).
z Use telnet with CLI command.
8.1.2
Password Configuration
There are two levels to access to phone: root level and general level. User with root level can
browse and set all configuration parameters, while user with general level can set all
configuration parameters except SIP (1-2) or IAX2’s that some parameters cannot be changed,
such as server address and port. User will have a different access level with different user name
and password.
z Default user with root level:
User
Name:
admin
Password:
123
The default password of phone screen menu is 123.
8.2 Setting via web browser
When this phone and PC are connected to network, enter the IP address of the WAN port in this
phone as the URL (e.g. http://xxx.xxx.xxx.xxx/ or http://xxx.xxx.xxx.xxx:xxxx/).
If User does not know the IP address, User can look it up on the phone’s display by pressing
Status button.
The login page is shown below: