PLANET VIP-2020PT - Manual (Page 80)

Enterprise HD PoE IP Phone
VIP-2020PT
Send after
（
3-30
）
seconds
Set the timeout of the last dial digit. The call will be sent after
timeout.
Press # to Do Blind
Transfer
Enable Blind Transfer On Hook, when executing Blind Transfer
End with #, press # after inputting the number that User want to
transfer, the phone will transfer the current call to the third party.
Blind Transfer on
OnHook
Enable Blind Transfer on On Hook, when executing Blind
Transfer, hang up after inputting the number that User want to
transfer, the phone will transfer the current call to the third party.
Attend Transfer on
OnHook
Enable Attend Transfer on On Hook, when executing Attended
Transfer, hang up after the third party answers, the phone will
transfer the current call to the third party.
Below is user-defined digital map rule:
[ ] Specifies a range that will match digit. May be a range, a list of ranges separated by
commas, or a list of digits.
* Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is
mandatory and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a
dial plan. If Tn is not specified it is assumed to be T0 by default on all dial plans.
Cause extensions 1000-8999 to be dialed immediately.
Cause 8 digit numbers started with 9 to be dialed immediately.
Cause 911 to be dialed immediately after it is entered.
Cause 99 to be dialed after 4 seconds.
Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.
End with “#”, Fixed Length, Time out and Digital Map Table can be used
simultaneously. System will stop dialing and send number according to User set
rules.
8.3.4.4 CONTACT
User can input the name, phone number and select ring type for each name here.