PLANET VIP-2020PT - Manual (Page 51)

Enterprise HD PoE IP Phone
VIP-2020PT
Current IP Gateway The current Gateway IP address.
MAC Timestamp Shows the time of getting MAC address
Please select the proper network mode according to the network condition. The
VIP-2020PT provides three different network settings:
z Static: If User ISP server provides User with the static IP address. Please select this
mode, and then finish Static Mode setting. If User doesn’t know about parameters of
Static Mode setting, please refer to User ISP.
z DHCP: In this mode, User will get the information from the DHCP server automatically;
need not have to input this information artificially.
z PPPoE: In this mode, User must input User ADSL account and password.
User can also refer to 2.2.1 Network setting to speedily set User network.
Obtain DNS server
automatically
Select it to use DHCP mode to get DNS address. If User does
not select it, User will use static DNS server. The default is
selecting it.
If User uses static mode, User needs to set it.
IP Address Input the IP address distributed to User.
Subnet Mask Input the Network mask distributed to User.
IP Gateway Input the Gateway address distributed to User.
DNS Domain
Set DNS domain postfix. When the domain which User input
cannot be parsed, phone will automatically add this domain to
the end of the domain which User input before and parse it
again.
Primary DNS Input User primary DNS server address.