PLANET VIP-2020PT - Manual (Page 62)

Enterprise HD PoE IP Phone
VIP-2020PT
SIP Config
Field name Explanation
SIP Line
Choose line to set info about SIP, there are 4 lines to choose. User can switch by
【Load】
button.
Basic Settings
Status Shows if the phone has been registered the SIP server or not;
or so, show Unapplied.
Server Address Input User SIP server address.
Server Port Set User SIP server port.
Authentication User Input User SIP register account name.
Authentication Password Input User SIP register password.
SIP User Input the phone number assigned by User VoIP service
provider. Phone will not register if there is no phone number
configured.
Display Name Set the display name.
Proxy Server Address
Set proxy server IP address (Usually, Register SIP Server
configuration is the same as Proxy SIP Server. But if User
VoIP service provider gives different configurations between
Register SIP Server and Proxy SIP Server, User need make
different settings).
Proxy Server Port Set User Proxy SIP server port.
Proxy User Input User Proxy SIP server account.
Proxy Password Input User Proxy SIP server password.
Domain Realm
Set the sip domain if needed, otherwise this VoIP phone will
use the Register server address as sip domain automatically.
(Usually it is same with registered server and proxy server IP
address).
Backup Server Address Input the Backup Server Address, if the primary server is
unavailable, then the phone will enable the Backup Server
Address.
Backup Server Port Specify the Backup Server Port.
Enable Registration Start to register or not by selecting it or not.
Codecs Settings
Disable Codecs/Enable
Codecs
Use the navigation keys to highlight the desired one in the
Enable/Disable Codecs list, and press the desired to move to
the other list.