PLANET IAP-2000PE User Manual
Page 54
User’s Manual of IAP-200x Series
-53-
Radius Server
Object
Description
IP Address:
Enter the IP address of Radius Server.
Port:
The default port of the RADIUS server for authentication is 1812. You need
not change this value unless your network administrator instructs you to do
so with additional information.
Shared Secret:
Enter a password as the key to be shared between the external
authentication server and the access point. The key is not send over the
network. This key must be the same on the external authentication server
and your router.
Session Timeout:
Set the time interval for session. Enter the proper value in the field.
Idle Timeout:
Set the idle time interval. Enter the proper value in the field.
In order to connect to the wireless AP successfully, the wireless settings (e.g. SSID) and
the security settings (e.g. encryption key) of the hosts in the wireless network should be
consistent with that of the wireless AP.