PLANET ICA-W8100 - Manual (Page 42)

Wireless Cube Fish-Eye IP Camera
ICA-W8100
42
Button Description
With its fisheye lens (180º wide angle panoramic view), the Camera can
offer the following live view display modes:
180 degree Ultra Wide Angle View
Twin PTZ (pan–tilt–zoom) Views
Triple views (1 Ultra Wide Angle View
+ Twin PTZ View)
When the Twin or Triple PTZ display mode is selected, click the ePTZ
function tool to display the PTZ setting tools.
Protocol: Option for TCP or UDP transmission protocol with
H.264/MPEG4/MJPEG streaming is available.
Video Stream: Two simultaneous streaming is supported for live viewing.
CH: Select the PTZ channel or display window (1 or 2) to implement PTZ
setting.
Step: Adjust and set the speed of live view panning motion.
Directional Buttons: Use to manually pan the scene to select and zoom a
specific area (1 of 4 maximum) to be monitored. To reset the scene back to
its previous status, click the center Home (H) button. You can also directly
click on the video to pan, zoom, and tilt a selected area.
Preset Point: After panning and zooming, assign the selected area a
Preset Point (1 to 4) and click Save button to store the setting. The
pre-defined point of view areas will be monitored in sequence. To cancel
the selection, click Remove button.
Zoom Slider: Drag slider to zoom-in and zoom-out the selected scene.
Zoom setting is saved with the selected pre-defined point of view area.