PLANET ICA-W8100 - Manual (Page 56)

Wireless Cube Fish-Eye IP Camera
ICA-W8100
56
The Privacy Mask tabbed pane allows you to mask or block private areas from surveillance for
privacy reason.
■ To block a private area from surveillance, follow the procedure below:
Step 1. Initially select the masking shape, e.g., “Line,” “Rectangle,” or “Ellipse” you wish
to use as screen to block the area from surveillance.
Step 2. Click and drag the mouse cursor to lay out a masking screen on the area you
wish to block, and then release the mouse right button. Notice that the laid out screen
turns into phantom block.
Step 3. If the laid out screen needs correction, click Delete button and redo the masking
screen lay out process.
Step 4. Once the masking screen is acceptable, click the Enable Privacy Mask check
box followed by clicking of the Save button. This will turn the laid out screen into solid
block.
■ To disable masking and remove the screen, do the following:
Step 1. Click Delete button.
Step 2. Click Save button and wait a while. Then the screen is permanently removed.
Step 3. To permanently disable the Privacy Mask function, disable the Enable Privacy Mask
check box.